Machine suitable for closing glass containers (jars and bottles) by means of TWIST-OFF CAPS.
Basement in thick AISI 304 stainless steel plate with height adjustable feet
Conveyor belt with stainless steel table-top chain mounted on an antifriction section with adjustable side guides
Side belts for containers dragging and steadiness
Caps releasing and pre-screwing unit
Steam sprigging unit for steam injection in the space between the cap and the container thread in order to soften the gasket and take the air away from the container head space, thus allowing the vacuum formation inside the container after closure.
Closing unit with variable speed flat belts
The caps releasing unit and screwing unit are adjustable independently (as regards also to the dragging belts) by hand-wheels with a very simple and rapid operation
Dragging and screwing belts centralised driving by geared motor
Drivings by independent geared motor, controlled and synchronised by inverter
Head lifting system by an electro-mechanical unit for machine’s head height adjustment according to the containers height with max. and min. automatic safety devices
MAGNETIC FEEDER FOR TWIST-OFF CAPS composed of: basement and feeding hopper in AISI 304 stainless steel, vertical magnetic elevator with belt in “vipla” which conveys the caps to the chute. The caps are then conveyed to the releasing group where they are picked by the containers. The absence of wrongly oriented capsules is granted by the presence of 3 control and expulsion groups which, by means of a side jet of air, expel the wrongly oriented caps and make them fall into the hopper. Chute for the connection with the capper.Driving by adjustable speed motor.
Electric control board in stainless steel
Manufactureing in AISI 304 stainless steel, except for some parts which are in a different material suitable for their functioning
The machine is adjustable in all its parts to treat twist-off caps and glass containers of different dimensions
After the start-up and first adjustments the machine does not need any operator intervention.
Output capacity: 14.000 containers/hour approx. with cap diam. 53 mm
Installed power: kW 2,45
Length: 3.700 mm (with magnetic feeder)
4.200 mm (with magnetic feeder)
Ø mm 43 (with 4 fins) ÷ 82 (*)
Ø mm 40 ÷ 140
h mm 40 ÷ 260
(*) OPTIONAL equipment available on request :
Channel with automatic regulation by pneumatic cylindres for the feeding of twist-off caps with 3 fins diam. 28 to 110 mm.
Copyright © 2018 All Rights Reserved