• Call: 1-307-316-7277

LINEAR CAPPER Mod. C150 with magnetic feeder

LINEAR CAPPER Mod. C150 with magnetic feeder





Video

Functioning

Macchina automatica per chiudere contenitori in vetro (vasi e bottiglie) con CAPSULE TWIST-OFF.

Manufacturing features

Basement with supporting plate in carbon steel, structure and total covering in AISI 304 stainless steel with inspection doors and height adjustable feet
Conveyor belt with stainless steel table-top chain mounted on an antifriction section with adjustable side guides
Side belts for containers dragging and steadiness
Caps releasing and pre-screwing unit
Steam sprigging unit for steam injection in the space between the cap and the container thread in order to soften the gasket and take the air away from the container head space, thus allowing the vacuum formation inside the container after closure.
Closing unit with variable speed flat belts
The caps releasing unit and screwing unit are adjustable independently (as regards also to the dragging belts) by hand-wheels with a very simple and rapid operation
Centralised motorization with variable speed driver
Head lifting system by an electro-mechanical unit for machine’s head height adjustment according to the containers height with max. and min. automatic safety devices

MAGNETIC FEEDER FOR TWIST-OFF CAPS composed of: basement and feeding hopper in AISI 304 stainless steel, vertical magnetic elevator with belt in “vipla” which conveys the caps to the chute. The caps are then conveyed to the releasing group where they are picked by the containers. The absence of wrongly oriented capsules is granted by the presence of 4 control and expulsion groups which, by means of a side jet of air, expel the wrongly oriented caps and make them fall into the hopper. Chute for the connection with the Capper. Driving by adjustable speed motor.

Electric control board in stainless steel.
Manufacturing in AISI 304 stainless steel, except for some parts which are in a different material suitable for their functioning.
The machine is adjustable in all its parts to treat twist-off caps and glass containers of different dimensions.After the start-up and first adjustments the machine does not need any operator intervention.
technical data
Output capacity: 16.000 containers/h approx. with cap diam. 53 mm
Installed power: kW 3,2
Length: 3.700 mm (with magnetic feeder)
Width:
4.200 mm (with magnetic feeder)
Caps dimensions:
Ø mm 43 (with 4 fins) ÷ 82 (*)
Containers dimensions:
Ø mm 40 ÷ 140

h mm 40 ÷ 260

(*) OPTIONAL equipment available on request :

Channel with automatic regulation by pneumatic cylindres for the feeding of twist-off caps with 3 fins diam. 28 to 110 mm.