Machine designed for the external washing of filled and capped containers and their dripping by high pressure blowing to remove possible residues of product (oil, brine, etc.) from the external surface.
The first section, equipped with nozzles fed by a high-pressure pump, is the washing one.
Nozzles throw hot water jets on the container entire external surface to eliminate any possible residue of oil, brine, etc.
The second section, equipped with nozzles too, but fed by net water, provides the rinsing.
At the washing tunnel outlet the third section provides the dripping by means of ten strong air jets.
Basement operating as container for washing hot water and collection tank for rinsing and dripping water, conveyor in stainless steel equipped with variable speed motor and containment guides adjustable for the different sizes of containers
Washing section composed of a tank equipped with water heating device, overflow, high-pressure pump with aspiration filter and force main to the nozzle manifold
Rinsing system by net water sprinkled through manifold and nozzles
Protection tunnel composed of a stainless steel case to prevent water overflow from the washing and rinsing sections
Dripping section composed of a high-pressure blower and a series of ten air blowing nozzles positioned on top and on the two sides of the containers. The nozzles are also adjustable according to the size of the containers
Electric control board in stainless steel
Manufacturing in AISI 304 stainless steel, except for some parts which are in a different material suitable for their functioning
The machine is adjustable to treat different sizes of containers
After the start-up and the relevant adjustments the machine does not need any operator assistance.
Output capacity: 8.000 containers/ h approx. of 314 ml (diam.67 mm)
Installed power: kW 9
Length: 4.700 mm
Copyright © 2017 All Rights Reserved