MONOBLOCK RINSER / FILLER /SCREW CAP FOR “MIGNON” 50 mL BOTTLES – 6000 BpH

OFFER : 9658-17_REVISION A

TYPE OF MONOBLOCK: AIR RINSING – FILLING – ROPP CAPPER
MODEL: EURO T24S24VA4
VARIABLE SPEED DEVICE: ELECTRONICALLY WITH “INVERTER” FREQUENCY CONTROLLER
TYPE OF RINSER: MOD. T24
TYPE OF GRIPPER: BY TWIST
NUMBER OF GRIPPERS: 24
RINSING LIQUID: DISPOSABLE MICRO FILTERED WATER
TURRET LIFTING: ELECTRICAL
TYPE OF FILLER: RM line
LIFTING CYLINDERS: PNEUMATIC
FILLING SYSTEM: BY GRAVITY
NR OF FILING VALVES: 24
VALVE DIAMETER: 8 mm
LIQUIDS THAT CAN BE USED: SPIRITS
TYPE OF BOTTLES CYLINDRICAL: GLASS 50 ml
DIAMETER OF THE BOTTLES: MIN 32 mm / MAX 59 mm
BOTTLES CONVEYING SYSTEM: BY MEANS OF A SCREW
MODEL: EURO/VA 4 HEADS
THROUGHPUT BT/H: 6000 BpH on 50 ml format
TECHNOLOGIES: TURRET EURO/VA 4 HEADS AROL BRAND
NUMBER OF CAPPING HEADS: 4
TYPE OF CAP: ALUMINIUM
CAP FEED: CENTRIFUGAL SYSTEM
BOTTLE CONVEYING SYSTEM: BY MEANS OF SCREWS

MAIN TECHNICAL AND CONSTRUCTIVE FEATURES
– Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI
304 with wide lateral access doors
– Safety guards in compliance with the CE norms with panels of plastic material and safety
micro-switches
– Parts in touch with the liquid of stainless steel AISI 304
– Power transmission through gears
– Inlet and outlet star-wheels with safety devices
– Electrical system in compliance with the international safety norms with low voltage controls
contained in a stainless steel box

1. RINSER SECTION: 24-gripper rinser
– Mechanical movement through gears
– Adjustable production speed
– Liquid distributor equipped with blocking device in case of missing bottles
– Adjustment of the rinsing and dripping times
– Rinsing liquid pressure regulator
– Bottle overturning with TWIST system

2. FILLING TURRET 24-VALVE GRAVITY FILLER RM line
– Parts in touch with the liquid in stainless steel AISI 304
– Type of cylinder: Pneumatic, air recycling, 310 mm stroke, ø 34 mm. The machines do not
foresee any height adjustment of the tank at the format change Tank height adjustment device
when carrying out the format change
– Power transmission through gears
– Bottle inlet by means of a screw
– Inlet and outlet star-wheels with safety devices
– Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid
flow in the container
– Control of the liquid in the tank by means of probes or level relays
– Outlet of the feeding pump controlled from the control board
– Tank with rounded bottom for the total discharge of the liquid

– Ball valve for the total discharge of the liquid contained in the tank
– Electrical system in compliance with the international safety norms with low voltage controls
contained in a stainless steel box.
– Filling by gravity system

1. CAPPING TURRET 4-HEADS AROL FOR ROPP ALUMINIUM CAPS
– Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI
304 with wide lateral access doors
– Safety guards in compliance with the CE norms with panels of plastic material and safety
micro-switches
– Power transmission through gears
– Inlet and outlet star-wheels with safety devices
– Electrical system in compliance with the international safety norms with low voltage controls
contained in a stainless steel box
– Completely manufactured in stainless steel
– N.3 closing heads
– Vibrating capsule feeder
– Pick-off caps distribution system
– Device for the height adjustment while carrying out the format change