­
  • Call: 1-307-316-7277

BOTTLING LINE FOR CRAFT BEER – 1.300 BpH FOR 33 cl

BOTTLING LINE FOR CRAFT BEER – 1.300 BpH FOR 33 cl

Offer: 10598-18

RINSING/FILLING/CAPPING MONOBLOC

Type OF MONOBLOCK: RINSER – FILLER – CROWN CORKER
MODEL: 9-10-1 C
CAPACITY IN BPH: 500 MIN – 1300 MAX
VARIABLE SPEED DEVICE: ELECTRONIC WITH “INVERTER”
TYPE OF RINSER: MOD. XP 9
TYPE OF GRIPPER: BY TWIST
NUMBER OF GRIPPERS: 9
RINSING LIQUID: WATER
TURRET LIFTING: ELECTRICAL
FILLING SYSTEM: LOW VACUUM
N° OF FILLING VALVES: 10
VALVE DIAMETRE: 15 mm
LIQUID THAT CAN BE USED: STILL BEER ( WITHOUT GAS ) – BOTTLE RE-FERMENTATION TYPE
CAPPER MODEL: HDC
NUMBER OF HEADS: 1
MAX. PRODUCTION BT/H: 1.300 B/H 330 ML STILL BEER
TYPE OF CORK: CROWN CAPS
DIMENSIONS OF THE SCREW CAP: 1 FORMAT ACCORDING TO SAMPLES
TYPE OF BOTTLES: ROUND GLASS – FROM 330 ML TILL 1500 ML
DIAMETER OF THE BOTTLES: ACCORDING TO SAMPLES

MAIN TECHNICAL AND CONSTRUCTIVE FEATURES.
– Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors
– Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches
– Parts in contact with the liquid of stainless steel AISI 304
– Power transmission by means of gears
– Inlet and outlet star-wheels with safety devices
– Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box

RINSER SECTION: 9-GRIPPER RINSER
– Mechanical movement through gears
– Adjustable production speed
– Liquid distributor equipped with blocking device in case of missing bottles
– Adjustment of the rinsing and dripping times
– Rinsing liquid pressure regulator
– Bottle overturning with TWIST system

FILLER SECTION: 10-VALVES LOW VACUUM FILLER
– Parts in touch with the liquid in stainless steel AISI 304
– Pneumatic lifting cylinders with air pressure lift
– Tank height adjustment device for the format change
– Power transmission by means of gears
– Bottle inlet by means of a screw
– Inlet and outlet star-wheels with safety devices
– Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container
– Control of the liquid in the tank by means of probes or level relays
– Outlet of the feeding pump controlled from the control board
– Valves easy to demount for cleaning and maintenance
– Tank with rounded bottom for the total discharge of the liquid
– Ball valve for the total discharge of the liquid contained in the tank
– Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box.
– Filling with LOW VACUUM system with tank and pump (as shown on following picture)
– 15 mm valves for glass bottles

ONE-HEAD CAPPER FOR CROWN CAPS
– Completely manufactured in stainless steel
– Automatic feeding system with vibrator
– Stainless steel cap chute
– 1 stainless steel closing heads
– Device for the height adjustment while carrying out the format change

AUTOMATIC LABELLER FOR AUTOADHESIVE LABELS
Machine suitable for application of self-adhesive labellers on cylindrical bottles.
The standard version is equipped with step motors and electronic speed driver.
The machine is equipped with electromechanical emergency stop device (product stop), activated in case of failure in the automatic packaging cycle and that can be used in manual mode for maintenance operations.
Speed: MAX 1.500 bph
MACHINE SUPPLIED COMPLETE WITH :
– Complete safety covers with plexiglass panel
– Infeed screw for bottle separation at the inlet
– In-line machine with N.1 labelling unit
– Labelling unit motion by stepping motors
– Labelling unit supplied with a loading plate for a roll Ø.250mm max.
– Labelling unit adjustable in height, for the easiest adjustment to the different types of labels and bottles
– Start signal for label release by precision sensor
– Speed of labelling unit synchronized with the speed of the machine
– Machine base-frame completely covered with stainless steel plate
– Aluminium parts covered with anti-rust painting
The base machine is complete with:
– N.1 station for application of front label (or front + back label from same reel) on cylindrical glass bottle